[Transmission type]:4G/LTE
[Power]:23~33dBm
[Size]:42*40*9.7mm
[Interface]:UART
[Weight]:11.9±0.1g
[Introduction]:E840-TTL(4G02-DNE) is developed for serial port devices and network servers to transmit data to each other through a network.
Characteristic Parameter | Description |
Frequency | LTE-FDD:B1/B3/B7/B8/B20/B28A WCDMA:B1/B8 GSM:B3/B8 |
LTE characteristic | Support max. of 3GPP R8 non-CA Cat 4 FDD and TDD Support 1.4MHz~20MHz , Downstream support: MIMO LTE-FDD: Max downstream rate 150Mbps, Max upstream rate50Mbps |
WCDMA characteristic | WCDMA: Max downstream rate 384Kbps, Max upstream rate 384Kbps |
GSM characteristic | GPRS: Max downstream rate 107Kbps,Max upstream rate 85.6Kbps EDGE: Max downstream rate 296Kbps,Max upstream rate 236.8Kbps |
Network protocol characteristic | TCP/UDP/MQTT |
Hardware characteristic | Description |
Antenna | IPX |
Data interface | UART |
Baud rate | Support Max. 921600bps,default 115200bps |
Transmitting power | Class 4 (33dBm±2dB) for GSM900 Class 1 (30dBm±2dB) for DCS1800 Class E2 (27dBm±3dB) for GSM900 8-PSK Class E2 (26dBm±3dB) for DCS1800 8-PSK Class 3 (24dBm+2/-1dB) for CDMA BC0 Class 3 (24dBm+1/-3dB) for WCDMA bands Class 2 (24dBm+1/-3dB) for TD-SCDMA bands Class 3 (23dBm±2dB) for LTE-FDD bands Class 3 (23dBm±2dB) for LTE-TDD bands |
Sensitivity | FDD B1: -101.5dBm (10M) FDD B3: -101.5dBm (10M) FDD B7: -99.5dBm (10M) FDD B8: -101dBm (10M) TDD B20: -102.5dBm (10M) TDD B28A: -102dBm (10M) WCDMA B1: -110dBm WCDMA B8: -110.5dBm GSM 3: -109dBm GSM 8: -109dBm |
Consumption(Typical) | 11uA@power off |
Bandwidth | 1.4/3/5/10/15/20MHz |
Operating temperature | -30℃- +70℃, extending to -40℃~+85℃ |
Operating voltage | DC 5V ~ 18V |
Size | 42×40×9.7 mm |