Home >Modem>4G/NB/GPRS DTU>4G DTU
E840-DTU(4G-02)E industrial 4g modem Grade fiberopticequipment 4G LTE Modem Modbus RTU to Modbus TCP Wireless Modem for M2m

[Transmission Type]: 4G

[Power]:23~33dBm

[Size]:82*84*24mm

[Interface]:RS485/RS232

[Weight]:142.5±5g

[Introduction]:E840-DTU(4G-02)E is an industrial 4g modem developed for serial port devices and network servers to transmit data to each other through a network. It is an LTE-FDD/WCDMA/GSM wireless communication data transmission modem with diverse receiving functions, supporting LTE-FDD, DC-HSDPA, HSPA+, HSDPA, HSUPA, WCDMA, EDGE, and GPRS network

1
Pin No. Name Description
1 RS232 RS232 interface
2 485_A To connect the end A of other RS485 device
3 485_B To connect the end B of other RS485 device
4 GND Ground
5 VCC Power supply, 8~28V,12V or 24V is recommended
6 PWR Power indicator
7 WORK Blue: Receipt transceiver pin, when the network receives data or the serial port receives data (50ms high/10ms low)Green: device status indication pin, Low: The device is powered on to search for a SIM card 1800ms low, 200ms high: The device checks the correct SIM card and is attaching to the network; High: The device is attached to the network successfully;
8 NET Green: Socket A link connection status indication pin High: Socket A is successfully connected to the network server; Low: Socket A is not successfully connected to the network server;Blue: Socket B link connection status indication pin High: Socket B is successfullyconnected to the network server; Low: Socket B is not successfully connected to the network server;
9 DC-IN DC adaptor,8~28V, 12V or 24V is recommended
10 RST Dip switch(downward,reset)
11 Restore Dip switchAfter the radio is powered on normally, the Restore dials from top to bottom, and continues down for 3~10S, then from bottom to top. After the process is completed normally, the radio parameters will be restored to the factory settings and restartedimmediately.
12 SIM SIMSIM card slot
13 ANT Antenna (SMA-K,50Ω impedance)