Ebyte uart ttl and can-bus two-way conversion module ttl to can bus interface converier module support for Modbus RTU
[Interface]：CAN
[Interface]：UART
[Feature]：UART TTL to CAN-BUS
[Introduction]：E810-TTL-CAN01 is a cost-effective CAN-BUS product with powerful data analysis capabilities. The intelligent protocol conversion module is compact and easy to install. It is a reliable assistant for engineering applications, project debugging and product development.
| No. | Item | Direction | Application |
|---|---|---|---|
| 1 | CANH | CAN high | CAN high |
| 2 | CANL | CAN low | CAN low |
| 3 | GND | Ground | Ground |
| 4 | TXD | UART transmit | Module transmits UART data |
| 5 | RXD | UART receive | Module receives UART data |
| 6~12 | NC | - | - |
| 13 | GND | Ground | Ground |
| 14 | VCC | Power input | Power input，5V or 3.3V is recommended |
| 15 | GND | Ground | Ground |
| 16 | RESET | Reset pin | The module with low level input enters the hardware reset state, and the module with high level input returns to the normal working state. This function is used for reset operation in an emergency. |
| 17 | CFG | Hardware parameter setting pin | For parameter setting，it should be connected with GND in short circuit. |
| 18 | Restore | Restore default | For restoring, it should be connected with GND in short circuit for 5S. Only valid when reset or power on again. |
| 19~20 | NC | - | - |
| 21 | STE | State indicator | When there is data transfer, the STE pin is low level |
| 22~25 | NC | - | - |
| 26 | RTS | Hardware control flow pin | Hardware control flow pin RTS |
| 27 | CTS | Hardware control flow pin | Hardware control flow pin CTS |
| 28 | GND | Ground | Ground |