UART WIreless Module LoRa Module Semtech SX1276 chip E32-868T30D
[IC]：SX1276
[Frequency]：862~893MHz
[Power]：21~30dBm
[Distance]：8.0km
[Interface]：UART
[Weight]：8.2±0.1g
[Introduction]：E32-868T30D UART WIreless Module LoRa Module Semtech SX1276 chip E32-868T30D is a 1W LoRa module ,it operates at 862~893MHz,it is based on original imported RFIC SX1276 from SEMTECH, transparent transmission is available with TTL level.The module adopts LoRa spread-spectrum technology,which means the transmitting distance is much.
| Pin No | Pin Item | Pin Direction | Pin Application |
|---|---|---|---|
| 1 | M0 | Input（weak pull-up） | Work with M1& decide the four operating modes. (Floating is not allowed, can be ground) |
| 2 | M1 | Input（weak pull-up） | Work with M0 & decide the four operating modes. (Floating is not allowed, can be ground) |
| 3 | RXD | Input | TTL UART inputs, connects to external TXD (MCU, PC) output pin.Can be configured as open-drain or pull-up input. |
| 4 | TXD | Output | TTL UART outputs, connects to external RXD (MCU,PC) input pin.Can be configured as open-drain or push-pull output |
| 5 | AUX | Output | To indicate module's working status & wakes up the external MCU. During the procedure of self-check initialization, the pin outputs low level. Can be configured as open-drain output or push-pull output. (Floating is allowed) |
| 6 | VCC | Input | Power supply 3.3V~5.2V DC |
| 7 | GND | Input | Ground |
| 8 | Fixing hole | - | Fixing hole |
| 9 | Fixing hole | - | Fixing hole |
| 10 | Fixing hole | - | Fixing hole |
| 11 | Fixing hole | - | Fixing hole |