[IC]:SX1278
[Frequency]:410~441MHz
[Power]:18~27dBm
[Distance]:5.0km
[Interface]:UART
[Introduction]:E32-433T27D is a 500mW wireless transceiver module. adopts LoRa spread spectrum technology, with this technology the module can transmit much longer distance than similar products under the same power with better anti-interference performance.
Pin No | Pin Item | Pin Direction | Pin Application |
---|---|---|---|
1 | M0 | Input(weak pull-up) | Work with M1& decide the four operating modes. (Floating is not allowed, can be ground) |
2 | M1 | Input(weak pull-up) | Work with M0 & decide the four operating modes. (Floating is not allowed, can be ground) |
3 | RXD | Input | TTL UART inputs, connects to external TXD (MCU, PC) output pin.Can be configured as open-drain or pull-up input. |
4 | TXD | Output | TTL UART outputs, connects to external RXD (MCU,PC) input pin.Can be configured as open-drain or push-pull output |
5 | AUX | Output | To indicate module's working status & wakes up the external MCU. During the procedure of self-check initialization, the pin outputs low level. Can be configured as open-drain output or push-pull output. (Floating is allowed) |
6 | VCC | Input | Power supply 3.3V~5.2V DC |
7 | GND | Input | Ground |
8 | Fixing hole | - | Fixing hole |
9 | Fixing hole | - | Fixing hole |
10 | Fixing hole | - | Fixing hole |
11 | Fixing hole | - | Fixing hole |