Home >Module>SPI-SOC-UART>Other

E29-400T22S long range Wireless Serial Port Transmission uart module modules Spread Spectrum 433mhz receiver transmitter

[Transmission power]:22dBm

[Communication distance]: 5km

[Air rate]:2.4k~16.4kbps

[Product size]:20*16mm

[Introduction]:Based on PANCHIP’s RF chip PAN3031,the E29-T series products are a new generation of wireless serial port module(UART)independently developed by Chengdu Ebyte Electronics Co., Ltd.It’s with a variety of transmission methods,working in the frequency band 410.125~ 493.125MHz (default 433.125MHz),and using industrial-grad high-precision 32MHz crystal oscillator.

1
Pin No.
 Pin Name Pin DirectionPin Function
1GND-Module ground
2GND-Module ground
3GND-Module ground
4GND-Module ground
5M0Input
pull-up)
Work with M1 to decide 4 working modes of module (not float, if not
used, could be grounded)
6M1Input
pull-up
Work with M0 to decide 4 working modes of module (not float, if not
used, could be grounded)
7RXDInput TTL UART inputs, connects to external TXD output pin
8TXDOutputTTL UART outputs, connects to external RXD input pin
9AUXOutputUsed to indicate the working status of the module;
For user to wakes up the external MCU and it outputs low level during
power-on self-check initialization; (can be left floating)
10VCC-Module power positive reference, voltage range: 2.65.5V DC
11GND-Module ground
12RST-Module Reset pin
13GND-Module ground
14SWDI0--
15VDD-3.3V
16RS485-RS485 enable
17PA-RXEN-NC
18PA-TXEN-NC
19GND-Module ground
20GND-Module ground
21ANT-Antenna
22GND-Module ground