[IC]:SX1280
[Frequency]:2400~2500MHz
[Power]:12dBm
[Distance]:3km
[Size]:17.5*28.7mm
[Introduction]:E280-2G4T12S is a wireless serial port module (UART) based on SEMTECH's SX1280 RF chip, transparent transmission mode, working in 2.4GHz frequency band, with LoRa, FLRC and GFSK three modulation and demodulation technologies, TTL level output, compatible with 3.3 IO port voltage of V and 5V.
Pin number | Pin name | Pin direction | Pin usage |
---|---|---|---|
1 | GND | Reference place | Module ground |
2 | NC | - | Empty feet not connected |
3 | MO | enter | The combination of M2, M1, and M0 determines the 8 working modes of the module (cannot be suspended, if not used, it can be grounded) |
4 | M1 | enter | The combination of M2, M1, and M0 determines the 8 working modes of the module (cannot be suspended, if not used, it can be grounded) |
5 | M2 | enter | The combination of M2, M1, and M0 determines the 8 working modes of the module (cannot be suspended, if not used, it can be grounded) |
6 | RXD | enter | TTL serial port input, connected to the external TXD output pin; can be configured as open-drain or pull-up input, see parameter settings for details |
7 | TXD | Output | TTL serial port output, connected to the external RXD input pin; can be configured as open-drain or push-pull output, see parameter settings for details |
8 | AUX | Output | Used to indicate the working status of the module, the user wakes up the external MCU, and outputs low level during the power-on self-check initialization period. It can be configured as an open-drain output or push-pull output. For details, see parameter settings (can be left floating) |
9 | VCC | - | Module power supply positive reference, voltage range: 2.3V ~ 5.5V DC |
10 | GND | Reference place | Module ground |
11 | GND | Reference place | Module ground |
12~19 | NC | - | Empty feet not connected |
20 | GND | Reference place | Module ground |