[Chip]:LLCC68
[Working frequency]:410MHz~493MHz
[Transmit power]:22dBm
[Distance]:6km
[Size]:10*10*2.5mm
[Weight]:0.5g±0.02g
[Introduction]:E220-400MM22S is an ultra-small volume independently developed based on a new generation of LoRaTM RF chip LLCC68 produced by Semtech, and is suitable for 433MHz, 470MHz SMD LoRaTM wireless modules, using industrial grade 32MHz crystal oscillator
Hardware Parameters | Parameter Value | Remark |
Crystal oscillation frequency | 32MHz | - |
Package - | SMD | - |
Connector | stamp hole | Spacing 1.27mm |
Communication interface | SPI | 0-10Mbps |
Size | 10* 10*2.5 mm | With shield |
Net weight | 0.5g±0.02g | |
RF interface | stamp hole | - |
Main Parameter | Performance | Remark | |||
Min. | Type | Max. | |||
Operating voltage(V) | 1.8 | 3.3 | 3.7 | ≥3.3V can guarantee the output power, more than 3.7V will permanently burn the module | |
Communication level(V) | - | 3.3 | - | Risk of burnout with 5V TTL | |
Operating temperature(°C) | -40 | +85 | Industrial grade design | ||
power consumption | TX current (mA) | - | 100 | - | Instantaneous power consumption |
RX current (mA) | - | 10 | - | - | |
Sleep current (uA) | - | 1.2 | - | software shutdown |
RF Parameter | Parameter Value | Remark | |
Operating frequency | 410MHz~493MHz | Support ISM | |
Transmit power | 21dBm~22dBm | The software is adjustable and needs to be developed and set by | |
Receiving sensitivity | -129dBm | BW_L=250kHz,SF = 10,LORATM | |
FIFO | 256Byte | Maximum length of single transmission | |
Modulation mode LoRa | LoRa | LoRa modulation is recommended | |
Blocking power | 10dBm | The probability of burning at close range is small | |
Air rate LoRa | LoRa(bps) | 1.76k~62.5k | User programming control |
Reference distance | 5500m | Clear and open environment, antenna gain 5dBi, antenna height |