Home >Module>LoRa>SX1268
E22-400T33S UART 433mhz Relay networking lora module LoRa Wireless Module

[Product size]:25*40.5mm

[Communication distance]:16km

[Transmit power]:33dBm

[Carrier frequency]:410.125~493.125MHz

[Chip solution]:SX1268

[Introduction]:E22-400T33S is a wireless serial port module (UART) based on SEMTECH's SX1268, working at 410.125 ~ 493.125MHz (default 433.125MHz),TTL level output, compatible with 3.3V and 5V IO port voltage. Compared with the traditional SX1278 solution, it has a longer transmission distance, faster speed, lower power consumption, and smaller size; it supports functions such as air wake-up, wireless configuration, carrier monitoring, automatic relay. communication keys and sub-package length setting. Ebyte provides customized development services on it. An obvious advantage is that SX1268 covers wider frequency range.

1
Pin No.Pin NamePin DirectionPin Function
1GNDInputModule ground
2VCCInputModule power positive reference, voltage range:3.3~5.5V DC
3AUXOutputUsed to indicate the working status of the module;
For user to wakes up the external MCU and it outputs low level during power-on self^check initialization; (can be left floating)
4TXDOutputTTL UART outputs, connects to external RXD input pin.
5RXDInputTTL UART inputs, connects to external TXD output pin.
6MlInput (weak pull-up)Work with MO to decide 4 working modes of module (not float, if not used: could be grounded).
7MOInput (weak pull-up)Work with Ml to decide 4 working modes of module (not float, if not used: could be grounded).
11ANTOutputAntenna interface (High frequency signal output, 50 ohm characteristic impedance )
12GND-Fixed ground
13GND-Fixed ground
14GND-Fixed ground
18NC-NC
19NC-NC
20NC-NC
21NC-NC
22RESETInputRESET pin when the program is loaded (be left floating, the user does not need to connect)
23GNDInputGround pin when loading program (be left floating, the user does not need to connect)
24NC-NC