[IC]:SX1262
[Frequency]:220.125~236.125MHz
[Power]:22dBm
[Distance]:5km
[Interface]:UART
[Weight]:2.3±0.1g
[Introduction]:E22-230T22S is a wireless UART module based on SEMTECH SX1262. It has multiple transmission modes working in the 220.125MHz~236.125MHz. Adopting the new LoRa spread spectrum, It has longer transmisstion distance, lower power consumption, smaller size than SX1278,supporting WOR, wirless configuration, carrier sense, relay networking function.
No. | Name | Direction | Function |
1 | NC | N/A | |
2 | GND | - | Module ground |
3 | NC | - | N/A |
4 | NC | - | N/A |
5 | NC | - | N/A |
6 | NC | - | N/A |
7 | NC | - | N/A |
8 | GND | - | Module ground |
11 | GND | - | Module ground |
12 | ANT | Output | Antenna interface (high frequency signal output, 50 ohm characteristic impedance) |
13 | GND | - | Module ground |
14 | GND | - | Module ground |
15 | GND | - | Module ground |
16 | GND | - | Module ground |
19 | GND | - | Module ground |
20 | M0 | Input(weak pull-up) | Work with M1 to decide 4 working modes of module (not suspended, if not used, could be grounded) |
21 | M1 | Input(weak pull-up) | Work with M0 to decide 4 working modes of module (not suspended, if not used, could |
22 | RXD | Input | TTL UART inputs, connects to external (MCU, PC) TXD output pin. |
23 | TXD | Output | TTL UART inputs, connects to external (MCU, PC) RXD output pin |
24 | AUX | Output | Used to indicate the working state of the module; The user wakes up the external MCU and outputs low level during power on self-test initialization; (can be suspended) |
25 | VCC | - | Module power supply positive reference,Power supply:2.3~5.5V DC |
26 | GND | - | Module ground |