Home >Module>LoRa>SX1276
FCC/CE/RoHs 10km SX1276 LoRa Wireless 915MHz 900 Mhz Transceiver Modules

[IC]:SX1276

[Frequency]:900~931MHz

[Power]:30dBm

[Distance]:10.0km

[Size]:25*40mm

[Weight]:4.8±0.1g

[Feature]:Lora spread spectrum

[Introduction]:Based on the original imported RF chip SX1276 from SEMTECH,E19-915M30S is a 1W wireless transceiver module,operates at 915MHz with SPI RF interface, supporting LoRa Spread spectrum technology.As a hardware platform,the secondary development is available.

E19-915M30S
Pin No Pin item Pin direction Pin application
1 GND - Ground electrode, connected to the power reference ground.
2 DIO5 Input/Output Configurable IO port(Please find more on SX1276 datasheet).
3 DIO4 Input/Output Configurable IO port(Please find more on SX1276 datasheet).
4 DIO3 Input/Output Configurable IO port(Please find more on SX1276 datasheet).
5 DIO2 Input/Output Configurable IO port(Please find more on SX1276 datasheet).
6 DIO1 Input/Output Configurable IO port(Please find more on SX1276 datasheet).
7 DIO0 Input/Output Configurable IO port(Please find more on SX1276 datasheet).
8 RST Input Reset
9 GND - Ground electrode, connected to the power reference ground.
10 GND - Ground electrode, connected to the power reference ground.
11 VCC - Power supply: 4.75~5.5V (Ceramic filter capacitoris advised to add)
12 SCK Input SPI clock
13 MISO Output SPI clock
14 MOSI Input SPI clock
15 NSS Input Chip select
16 TXEN Input Radio frequency switch control, make sure the TXEN pinis in high level, RXEN pin is in low level when transmitting.
17 RXEN Input Radio frequency switch control, make sure the TXEN pinis in high level, RXEN pin is in low level when transmitting.
18 GND - Ground electrode, connected to the power reference ground
19 ANT - Antenna
20 GND - Ground electrode, connected to the power reference ground
21 GND - Ground electrode, connected to the power reference ground
22 GND - Ground electrode, connected to the power reference ground