Home >Module>LoRa>SX1276
EBYTE SX1276 LoRa Module 915MHz 5km Long Range Wireless Transmitter And Receiver SPI 868MHz Rf Module LoRa SX1276

[IC]: SX1276

[Frequency]:862~931MHz

[Power]: 20dBm

[Distance]: 5km

[Size]:15*15mm

[Antenna]: Stamp hole

[Feature]:LoRa spread spectrum,super mini size

[Introduction]:E19-900M20S2 is an ultra-small 915MHz SMD LoRaTM wireless module independently developed based on the SX1276 produced by Semtech in the United States. It uses an industrial-grade high-precision 32MHz crystal oscillator.

1
Pin No. Item Direction Description
1 GND - Ground wire, connected to the power reference ground
2 GND - Ground wire, connected to the power reference ground
3 GND - Ground wire, connected to the power reference ground
4 GND - Ground wire, connected to the power reference ground
5 DIO0 Input/Output Configurable general IO port (see SX1276 manual for details)
6 DIO1 Input/Output Configurable general IO port (see SX1276 manual for details)
7 DIO2 Input/Output Configurable general IO port (see SX1276 manual for details)
8 DIO3 Input/Output Configurable general IO port (see SX1276 manual for details)
9 NC - Internal use of the module (this pin cannot be connected to any electrical network in the circuit design)
10 DIO5 Input/Output Configurable general IO port (see SX1276 manual for details)
11 GND - Ground wire, connected to the power reference ground
12 GND - Ground wire, connected to the power reference ground
13 VCC - Power supply, range 2.3~3.6V (recommended 3.3V, recommended to add ceramic filter capacitor)
14 SCK Input SSPI clock input pin
15 MISO Output SPI data output pin
16 MOSI Input SPI data input pin
17 NSS Input Module chip select pin, used to start a SPI communication, active low
18 RST Input Chip reset trigger input pin, active low
19 GND - Ground wire, connected to the power reference ground
20 GND - Ground wire, connected to the power reference ground
21 ANT - antenna
22 GND -  Ground wire, connected to the power reference ground