Home >Module>LoRa>SX1278
SX1278 LoRa Module Spi 20dBm Long Range Wireless Transceiver 433MHz Rf Module

[IC]:SX1278

[Frequency]:410~441MHz

[Power]:20dBm

[Distance]:5.0km

[Interface]:SPI

[Weight]:2.3±0.1g

[Introduction]:E19-433M20SC is based on original imported RFIC SX1278 from SEMTECH, adopts LoRa spread spectrum technology. Which means the transmitting distance is much longer than before, besides the power density is more concentrated and anti-interference performance is better.

Pin Definition
Pin No. Pin item Pin direction Pin application
1 GND Input Ground electrode, connected to the power reference ground.
2 DIO5 Input /Output Configurable IO interface(See more details in SX1278 data sheet
3 DIO4 Input /Output Configurable IO interface(See more details in SX1278 data sheet
4 DIO3 Input /Output Configurable IO interface(See more details in SX1278 data sheet
5 DIO2 Input /Output Configurable IO interface(See more details in SX1278 data sheet
6 DIO1 Input /Output Configurable IO interface(See more details in SX1278 data sheet
7 DIO0 Input /Output Configurable IO interface(See more details in SX1278 data sheet
8 RST Input Reset
9 NC - Not connect
10 GND Input Ground electrode, connected to the power reference ground.
11 VCC Input Power supply 1.8V-3.6V DC. 3.3V and external ceramic filter capacitor are recommended.)
12 SCK Input SPI clock
13 MISO Output SPI clock
14 MOSI Input SPI clock
15 NSS Input Chip select
16 TXEN Input Radio frequency switch control, make sure the TXEN pinis in high level, RXEN pin is in low level when transmitting.
17 RXEN Input Radio frequency switch control, make sure the TXEN pinis in high level, RXEN pin is in low level when transmitting.
18 GND - Ground electrode, connected to the power reference ground.
19 GND - Ground electrode, connected to the power reference ground.
20 ANT Output Antenna
21 GND - Ground electrode, connected to the power reference ground.