E18-2G4Z27SP Ebyte CC2530 PA LNA 500mW Long Distance Zigbee Module Wtih PCB Antenna
[IC]：CC2530
[Frequency]：2.40~2.48GHz
[Power]：27dBm
[Distance]：800m
[Size]：16*27mm
[Antenna]：PCB on board antenna
[Introduction]：E18-2G4Z27SP is a small size 2.4GHz ZigBee wireless module designed and produced by Ebyte, SMD, PCB on-board antenna, transmission power 500mW, pin spacing 1.27mm,suitable for a variety of application scenarios (especially smart Home).
| Main parameter | Min. | Typ. | Max. | Unit | Remark |
| Operating voltage | 2.5 | 3.3 | 3.6 | V | ≥3.3V ensures output power |
| Communication level | - | 3.3 | - | V | For 5V TTL, it may be at risk of burning down |
| TX current | - | 500 | - | mA | Instantaneous power consumption @27dBm |
| RX current | - | 36 | - | mA | - |
| Sleep current | - | 2.5 | - | uA | Software is shut down |
| Operating temperature | -40 | - | +85 | ℃ | Industrial design |
| Operating frequency | 2.400 | - | 2.480 | GHz | Support ISM band |
| Max TX power | 26.8 | 27 | 27.4 | dBm | - |
| Receiving sensitivity | -98 | -99 | -100 | dBm | Air data rate is 250kBps |
| Main parameter | Performance | Remark |
| Distance for reference | 1600m | PCB on board antenna |
| Protocol supported | ZigBee | - |
| Communication interface | I/O | All IO ports lead |
| Packaging | SMD | - |
| Connector | 1.27mm | - |
| IC | CC2530F256RHAT/QFN40 | Built-in PA+LNA |
| FLASH | 256kB | - |
| RAM | 8kB | - |
| Core | 8051 | - |
| Size | 16*27.0mm | - |
| Antenna | PCB on board antenna | Equivalent impedance is about 50Ω |