English English
CN
Home >Module>BLE>TLSR**
Bluetooth module
SIG mesh standard module
low power consumption
Bluetooth module
SIG mesh standard module
low power consumption
Ebyte Bluetooth module SIG mesh standard module with low power consumption

[Frequency]：2400~2483.5MHz

[Modulation]：GFSK

[Range]：60m

[Size]：19*13mm

[Max TX Power]：10dBm

[Introduction]：E104-BT12NSP Bluetooth Mesh self-organizing network module supports Sigmesh V1.0 standard, single network theory can accommodate up to 16,383 nodes.The network information is automatically memorized after the device enters the net, and the network time is completed within1 second.

Send Inquiry
Purchase
Manual Compare
Pin Definition
No. Pin item Pin direction Application
1 GND - Ground wire, connect to the power reference ground.
2 PWM1 PWM Output Green light corresponding to SIGMESH HSL
3 PWM2 PWM Output Red light corresponding to SIGMESH HSL
4 NC - -
5 NC - -
6 DIO1 Input Switch input foot, PA0 foot for TLSR8253.
7 DIO2 Input Switch input foot, PA1 foot for TLSR8253.
8 NC - -
9 NC - -
10 SWM - -
11 SWS - -
12 NC - -
13 LINK Output Network indicator. High level of pilot foot output after network formation.
14 NC - -
15 PWM3 PWM Output Blue light corresponding to SIGMESH HSL model
16 NC - -
17 TXD Output UART launch boot. Receive user's string of users.
18 RXD Input UART receive boot, send to user string
19 VCC - Power supply, range 1.9~3.6V (Proposed to increase external ceramic filter capacitance)
20 GND - Ground wire, connect to the power reference ground.
21 NC - -
22 NC - -
23 NC - -
24 NC - -
25 RST Input The chip reset triggers the input foot. It's working at low levels.
26 GND - Ground wire, connect to the power reference ground.