E104-BT12LSP_TLSR**_BLE

E104-BT12LSP Bluetooth Mesh Ad Hoc Network Module

[Working frequency]： 2400~2483.5MHz

[Modulation method]：GFSK

[Communication distance]：60m

[Product size]：19*13mm

[Maximum transmit power]：10dBm

[Introduction]：The E104-BT12SP Bluetooth mesh ad hoc network module supports the sig mesh V1.0 standard, and a single network can accommodate up to 16383 node devices in theory. After the device is connected to the network, the network information is automatically memorized, and the network connection time is completed within 1 second. The mobile APP can act as an agent for any node to access the network to realize remote control of the mesh network. It is convenient to implement in-network broadcast or transparent transmission of arbitrary fixed-point data, and the maximum support for a single packet of transparent transmission data is 60 bytes. It is very suitable for Internet of Things information collection, large-scale networking communication scenarios, smart home and other applications.

Send Inquiry

Purchase

Manual Compare

serial number	pin	Pin direction	Remark
1	GND	-	Ground wire, connected to power reference ground
2	PWM1	PWM output	Green light corresponding to SIGMESH HSL model
3	PWM2	PWM output	Red light corresponding to SIGMESH HSL model
4	NC	-	users don't need to care
5	NC	-	users don't need to care
6	DIO1	enter	Switch input pin, corresponding to PA0 pin of TLSR8253
7	DIO2	enter	Switch input pin, corresponding to PA1 pin of TLSR8253
8	NC	-	users don't need to care
9	NC	-	users don't need to care
10	SWM	-	users don't need to care
11	SWS	-	users don't need to care
12	NC	-	users don't need to care
13	LINK	-	users don't need to care
14	NC	-	users don't need to care
15	PWM3	PWM output	Blue light corresponding to SIGMESH HSL model
16	NC	-	users don't need to care
17	TXD	output	The transmitting pin of UART corresponds to the user's serial port receiving
18	RXD	enter	The receiving pin of UART corresponds to the user serial port sending
19	VCC	-	Power supply, ranging from 1.9 to 3.6V (it is recommended to add ceramic filter capacitors externally)
20	GND	-	Ground wire, connected to power reference ground
21	NC	-	users don't need to care
22	NC	-	users don't need to care
23	NC	-	users don't need to care
24	NC	-	users don't need to care
25	RST	enter	Chip reset trigger input pin, active low
26	GND	-	Ground wire, connected to power reference ground