[IC]:W600
[Frequency]:2.4~2.484GHz
[Power]:20dBm
[Distance]:400m
[Size]:17*16*2.5mm (±0.2)
[Weight]:1.6±0.1g
[Introduction]:E103-W05B is a SMD module under the E103-W05 series (for the convenience of the following description, collectively referred to as E103-W05 or W05 below), this module product is a low-cost, cost-effective 100mW (20dBm) wifi digital transmission Module, small in size.
No. | Pin item | Direction | Application |
---|---|---|---|
1 | RST | I | Hardware reset pin, low level reset |
2 | NC | IO | Floating, GPIO14 of the internal chip can be used as input and outputpins |
3 | NC | I | Floating, WAKE pin of internal chip, high level wake up |
4 | NC | IO | Floating, GPIO15 of the internal chip can be used as input and outputpins |
5 | NC | IO | Floating, GPIO16 of the internal chip can be used as input and outputpins |
6 | NC | IO | Floating, GPIO17 of the internal chip can be used as input and outputpins |
7 | NC | IO | Floating, GPIO18 of the internal chip can be used as input and outputpins |
8 | VCC | P | Power supply, range 3.0~3.6V (standard 3.3V) |
9 | GND | P | Ground wire, connected to the power reference ground |
10 | NC | IO | Floating, GPIO6 of the internal chip can be used as input and outputpins |
11 | NC | IO | Floating, GPIO7 of the internal chip can be used as an input and outputpin |
12 | NC | IO | Floating, GPIO8 of the internal chip can be used as input and outputpins |
13 | NC | IO | Floating, GPIO9 of the internal chip can be used as input and outputpins |
14 | NC | IO | Floating, GPIO10 of the internal chip can be used as input and outputpins |
15 | RXD | I | Serial port receiving pin, support AT command |
16 | TXD | O | Serial port sending pin, support AT command |
Note: I:input; O:output; P:power supply |