Ebyte EEE802.11b/g/n 20dBm 300m 2.4GHz CC3200 WiFi Module
[IC]：CC3200
[Frequency]：2.402~2.484GHz
[Power]：20dBm
[Distance]：300m
[Interface]：UART
[Weight]：2.1±0.1g
[Introduction]：E103-W02, based on CC3200 of TI, is an ultra low power UART to Wi-Fi module with small size SMT packing and PCB antenna operating at 2.4 ~ 2.484GHz. It supports AT command, standard IEEE802.11b/g/n protocol and complete TCP/IP protocol stack.
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | - | Power ground |
| 2 | GPIO26 | Input/Output | Universal IO port |
| 3 | GPIO27 | Input/Output | Universal IO port |
| 4 | RST | Input | Module reset pin, low reset |
| 5 | SOP2 | Input | Burn simulation mode selection |
| 6 | SOP1 | Input | Burn simulation mode selection |
| 7 | SOP0 | Input | Burn simulation mode selection |
| 8 | GND | - | Power ground |
| 9 | GND | - | Power ground |
| 10 | VCC | - | Equipment power supply VDC: 2.4V~3.6V (300mA or more) |
| 11 | GND | - | Power ground |
| 12 | GND | - | Power ground |
| 13 | GND | - | Power ground |
| 14 | GPIO31 | Input/Output | Universal IO port |
| 15 | GPIO0 | Input/Output | Universal IO port |
| 16 | GND | - | Power ground |
| 17 | GND | - | Power ground |
| 18 | GPIO30 | Input/Output | Universal IO port |
| 19 | GPIO1 | Output | UART output pin, support AT command |
| 20 | GPIO2 | Input | UART input pin, support AT command |
| 21 | GPIO3 | Input/Output | Universal IO port |
| 22 | GPIO4 | Input/Output | Universal IO port |
| 23 | GPIO5 | Input/Output | Universal IO port |
| 24 | GPIO6 | Input/Output | Universal IO port |
| 25 | GPIO7 | Input/Output | Universal IO port |
| 26 | GPIO8 | Input/Output | Universal IO port |
| 27 | GPIO9 | Output | WiFi connection status indicator, connected output is low, output is not connected |
| 28 | GND | - | Power ground |
| 29 | GND | - | Power ground |
| 30 | GPIO10 | Output | Network connection status indicator, connected output is low, output is not connected |
| 31 | GPIO11 | Output | Smartconfig status indicator, low when entering status, high when not entering status |
| 32 | GPIO12 | Input | Restore the factory setting pin and set it low when starting. After the status indicator flashes three times, the factory setting is restored. |
| 33 | GPIO13 | Input/Output | Universal IO port |
| 34 | GPIO14 | Input/Output | Universal IO port |
| 35 | GPIO15 | Input/Output | Universal IO port |
| 36 | GPIO16 | Input/Output | Universal IO port |
| 37 | GPIO17 | Input/Output | Universal IO port |
| 38 | GPIO22 | Input/Output | Universal IO port |
| 39 | GPIO28 | Input/Output | Universal IO port |
| 40 | TDI | Input | JTAG simulation foot |
| 41 | TDO | Output | JTAG simulation foot |
| 42 | TCK | Input | JTAG simulation foot |
| 43 | TMS | Input/Output | JTAG simulation foot |
| 44 | GND | - | Power ground |