[IC]:Si24R1
[Frequency]:2.4~2.525GHz
[Power]:7dBm
[Distance]:0.3km
[Size]:12*19mm
[Weight]:0.5±0.1g
[Introduction]:E01C-ML01S is a small size SMD module based on Si24R1, operates at 2.4Ghz with PCB antenna, using industrial-grade high-precision 16MHz crystal oscillator. The RF performance of it and components selection during R&D are all in accordance with industrial grade standards.
Main Parameters | Value | Remarks | |
Min. | Max | ||
Power supply(V) | 0 | 3.6 | Voltage over 3.6V will causepermanent damage to module |
Blocking power(dBm) | - | 10 | Chances of burn is slim when modulesare used in short distance |
Operating temperature(℃) | -40 | +85 | - |
Main Parameters | Value | Remarks | ||
Min. | Typical | Max | ||
Operating voltage(V) | 2.0 | 3.3 | 3.6 | ≥3.3V ensures output power |
Communication level(V) | - | 3.3 | - | For 5V TTL, it may be at risk ofburning down |
Operating temperature(℃) | -40 | - | 85 | Industrial design |
Operating frequency(MHz) | 2.4 | - | 2.525 | Support ISM band |
TX Current(mA) | - | 12 | - | 0dBm |
RX current(mA) | - | 15 | - | - |
Sleep current(μA) | - | 0.7 | - | Software is shut down |
Max Tx power(dBm) | - | 7 | - | - |
Receiving sensitivity(dBm) | - | -83 | - | Air data rate is 250kbps |
Air data rate(bps) | 250k | - | 2M | Controlled via user’s programming |
Main parameter | Description | Remarks |
Distance for reference | 300m | Test condition:clear and open area, antenna gain: 5dBi,antennaheight: 2.5m,air data rate: 250kbps |
FIFO | 32Byte | Max length transmitted each time |
Crystal frequency | 16MHz | - |
Modulation | GFSK | - |
Package | SMD | - |
Connector | 1.27mm | - |
Communication interface | SPI | 0-10Mbps |
Size | 12 * 19mm | Without SMA |
Antenna | PCB antenna | 50ohm impedance |