Home >Module>SPI-SOC-UART>SI24R1
EBYTE E01C-2G4M27SX SI24R1 Wireless Module 2.4GHz 4km Remotely Rf Transmitter Receiver with IPEX Antenna Interface

[Chip solution]:Si24R1

[Communication interface]:SPI

[Transmission power]: 27dBm

[Reference distance]:4km

[Product size]:18*14.5mm

[Introduction]:The E01C-2G4M27SX is an ultra-small 2.4GHz SMD wireless module with a maximum transmit power of 500mW based on the domestic Si24R1 core.The module has a built-in power amplifier (PA) and low noise amplifier (LNA), which enables the maximum transmit power of 500mW and further improves the reception sensitivity,and significantly improves the overall communication stability compared to products withoutpower amplifier and low noise amplifier.The product uses an industrial grade high precision 16MHz crystal.


Main parametersDescriptionRemark
Reference Distance4000mClear and open, antenna gain 5dBi, antenna height 2.5m,
air rate 250kbp
FIFO32ByteMaximum length of single transmission
Crystal Frequency 16M1z-
Modulation mode GFSK-
Packaging methodSMD-
Interface method1.27 mm pin -
Communication Interface SPI0-10Mbps
Dimension18*14.5 mm-
Antenna InterfaceIPEXEquivalent impedance approx. 50Ω
Product Weight1.1g±0.1g




Main parametersPerformanceRemark
Min.
Max
Supply voltage(V) 2.33.6Permanent module burn out above 3.6V
Operating temperature(°C)-40+85Industrial Grade
Main parameters
PerformanceRemark
Min. Typical Max
Operating voltage (V)
2.33.33.63.3V for guaranteed output power
Communication level (V)
-3.3-Risk of burnout with 5V TTL
Operating temperature (°C)-40-85Industrial grade design
Operating Frequency Band (GHz)2400-2525Support ISM band
Power
consumptio
n
Emission current
(mA)
-720 -Instantaneous Power Consumption
Receiving current
(mA)
-23--
Dormant current (μA)---Low power mode not supported
Maximum transmit power (dBm)262727-
Receiving Sensitivity (dBm) -113 -114 -115 Air speed of 250 kbps
Air Rate (bps)250k-2MUser configurable